Bently Nevada 24701-34-05-00-031-04-02

Product Details

24701-34-05-00-031-04-02 Product Description

The Bently Nevada 24701-34-05-00-031-04-02 is a precision proximity probe housing and interface assembly engineered for the Bently Nevada 3300 Series continuous vibration monitoring platform. Designed to operate at the intersection of rotating machinery diagnostics and industrial network infrastructure, this module serves as a critical data acquisition node within smart factory environments. It captures high-resolution shaft displacement and vibration signals from rotating equipment — compressors, turbines, pumps, and motors — and feeds that data into the broader industrial communication architecture, enabling real-time condition monitoring, predictive maintenance, and remote diagnostics across the entire plant network.

In modern smart manufacturing facilities, the integrity of the data chain from field sensor to control room is non-negotiable. The 24701-34-05-00-031-04-02 is built to anchor that chain at the field level, delivering consistent, low-latency signal output that integrates seamlessly with upstream communication modules, PLC controllers, and SCADA platforms.

The 24701-34-05-00-031-04-02 operates as the origination point of a complete industrial data chain. At the field level, the proximity probe detects shaft radial position and vibration amplitude with micron-level precision. This raw analog signal is routed through the Bently Nevada 3300/16-23-01-01-00-00-00 16-channel monitor rack, where it is conditioned, scaled, and converted into engineering units. The monitor rack communicates alarm states and process values to the plant's Allen-Bradley ControlLogix PLC via a Bently Nevada 3500/92 Communication Gateway, which supports Modbus TCP and EtherNet/IP — bridging the proprietary 3300 Series protocol into the standard industrial Ethernet backbone.

From the PLC layer, data flows upward to the Wonderware System Platform SCADA or GE iFIX HMI, where operators visualize real-time vibration trends, bearing temperatures, and shaft centerline plots on dynamic dashboards. Simultaneously, the Bently Nevada System 1 Condition Monitoring Software aggregates historical waveform data, enabling engineers to perform spectrum analysis and detect early-stage mechanical faults — bearing wear, rotor imbalance, misalignment — weeks before failure.

For remote plant locations or offshore installations, an industrial edge gateway (such as the Moxa UC-8112 or similar IIoT edge controller) collects the conditioned signal data and transmits it over secure VPN tunnels to centralized cloud-based condition monitoring platforms. This architecture allows maintenance engineers to perform remote diagnostics without physical site access, dramatically reducing unplanned downtime and travel costs.

The network also integrates with variable frequency drives (VFDs) monitoring motor load and speed, Pt100 temperature sensors on bearing housings, and 4–20 mA pressure transmitters on lube oil systems — all feeding into the same SCADA data historian. The Bently Nevada TK-3e Transducer and Bently Nevada 330180 Extension Cable are commonly deployed alongside the 24701-34-05-00-031-04-02 to complete the probe-to-monitor signal path, ensuring signal integrity across long cable runs in electrically noisy industrial environments.

Industrial-grade managed Ethernet switches with PROFINET or EtherNet/IP support segment the network traffic between the machinery protection layer and the process control layer, maintaining deterministic communication latency below 10 ms — a critical requirement for vibration monitoring systems where alarm response time directly impacts equipment safety.

Protocol Fragmentation: Many legacy rotating machinery protection systems output proprietary analog or serial signals that cannot be directly consumed by modern PLC or DCS platforms. The 24701-34-05-00-031-04-02, when paired with the Bently Nevada 3500/92 Communication Gateway, resolves this by translating 3300 Series monitor data into Modbus TCP, EtherNet/IP, or OPC-UA — enabling seamless integration with any modern control platform without replacing existing field hardware.

Data Silos in Machinery Protection: Vibration data trapped within standalone monitor racks cannot contribute to plant-wide predictive maintenance programs. By connecting the 3300 Series network to the plant SCADA historian via the communication gateway, all vibration, position, and alarm data becomes available for cross-asset correlation, enabling maintenance teams to identify systemic issues — such as foundation resonance affecting multiple machines — that would be invisible in siloed systems.

Remote Monitoring Gaps: For unmanned substations, remote compressor stations, or offshore platforms, the inability to perform real-time vibration monitoring creates significant operational risk. The 24701-34-05-00-031-04-02 integrated into an IIoT-enabled architecture allows continuous remote monitoring with automated alarm escalation via SMS or email, eliminating the need for routine manual inspections.

Production Line Transparency: By feeding vibration and displacement data into MES (Manufacturing Execution Systems) and ERP platforms, plant managers gain visibility into equipment health as a production KPI — enabling data-driven decisions on maintenance scheduling, spare parts procurement, and production planning without disrupting ongoing operations.

Alarm Tracking and Audit Trails: Integrated with SCADA alarm management systems, the 24701-34-05-00-031-04-02 network node contributes to structured alarm logs with timestamps, severity levels, and operator acknowledgment records — supporting regulatory compliance and post-incident root cause analysis.

Q1: Is the Bently Nevada 24701-34-05-00-031-04-02 compatible with Modbus TCP SCADA systems? The 24701-34-05-00-031-04-02 outputs analog signals natively. When integrated with the Bently Nevada 3500/92 or a compatible Modbus gateway, the system becomes fully compatible with Modbus TCP, EtherNet/IP, and OPC-UA SCADA platforms, including Wonderware, Ignition, and GE iFIX. Communication latency in standard industrial Ethernet environments is typically under 10 ms.

Q2: Can this module be expanded into a larger multi-channel vibration monitoring network? Yes. The 3300 Series architecture is inherently scalable. Additional proximity probe channels can be added by expanding the monitor rack configuration. The communication gateway aggregates all channel data into a single network node, allowing SCADA systems to poll hundreds of measurement points from a single IP address without additional network infrastructure.

Q3: How is remote diagnostics performed with this product in the network? Remote diagnostics are enabled by connecting the 3300 Series monitor output through an industrial edge gateway to a cloud-based condition monitoring platform such as Bently Nevada System 1 or a third-party IIoT platform. Engineers can access real-time waveform data, trend plots, and alarm histories from any location via secure web browser or mobile application, enabling predictive maintenance decisions without site visits.

Q4: What quality assurance and warranty coverage does NANKMOS provide for the 24701-34-05-00-031-04-02? Every unit supplied by NANKMOS undergoes pre-shipment functional testing to verify signal output integrity and connector condition. The 24701-34-05-00-031-04-02 is covered by a 12-month warranty from the date of shipment. In-stock units are available for immediate dispatch with a lead time of 3–5 business days. For volume procurement or urgent requirements, contact our technical sales team directly.