Kollmorgen AKD-P00606-NBEC-0051 Servo Drive

Product Details

AKD-P00606-NBEC-0051 Product Description

The Kollmorgen AKD-P00606-NBEC-0051 is a high-performance EtherCAT servo drive from the AKD series, engineered for precision motion control and seamless integration into modern industrial data networks. With native EtherCAT fieldbus support, this drive enables deterministic, real-time communication between servo axes, PLC controllers, motion coordinators, and upper-level SCADA or HMI systems — forming a critical node in the smart factory data chain.

Designed for demanding automation environments, the AKD-P00606-NBEC-0051 delivers 6A continuous output current with a peak rating suited for high-dynamic servo applications. Its NBEC network interface card provides EtherCAT connectivity at the hardware level, enabling cycle times as low as 62.5 µs for synchronized multi-axis motion across distributed control architectures. Whether deployed in CNC machining centers, robotic assembly lines, packaging systems, or precision material handling, this drive maintains data integrity and motion synchronization across the entire automation network.

In a fully connected smart factory, the AKD-P00606-NBEC-0051 operates as a real-time motion node within a layered EtherCAT network topology. At the field level, Kollmorgen AKM servo motors equipped with SFD3 or EnDat 2.2 feedback devices feed position, velocity, and torque data directly into the drive's closed-loop control engine. The drive then communicates this data upstream via EtherCAT to a Beckhoff CX series embedded PC or a Siemens S7-1500 PLC running TIA Portal with EtherCAT master functionality.

Within the same EtherCAT segment, additional AKD-P series drives — such as the AKD-P01206-NBEC-0051 or AKD-P02406-NBEC-0051 — can be daisy-chained to form a synchronized multi-axis motion bus. This architecture supports distributed servo control without the latency penalties of traditional fieldbus systems like PROFIBUS or DeviceNet. The EtherCAT master polls all slave nodes within a single network cycle, ensuring that position commands, velocity references, and torque limits are applied simultaneously across all axes.

At the network layer, an industrial managed Ethernet switch — such as a Hirschmann MICE or Phoenix Contact FL SWITCH series — segments the EtherCAT traffic from the plant-level Ethernet backbone, maintaining deterministic performance even in high-traffic environments. Remote I/O modules, such as Beckhoff EK1100 EtherCAT couplers with EL series I/O terminals, extend digital and analog signal acquisition from field sensors and actuators into the same EtherCAT frame, eliminating the need for separate fieldbus wiring.

HMI panels — including Kollmorgen's own operator interfaces or third-party Weintek and Siemens TP series touchscreens — connect to the PLC via standard Ethernet/IP or PROFINET, pulling real-time drive status, fault codes, and axis position data for operator visualization. SCADA platforms such as Ignition by Inductive Automation or Wonderware System Platform aggregate this data from the PLC OPC-UA server, enabling plant-wide dashboards, trend logging, and alarm management across multiple production lines.

For remote diagnostics, the AKD-P00606-NBEC-0051 supports Kollmorgen WorkBench remote access via the plant Ethernet network, allowing engineers to monitor drive parameters, tune servo loops, and retrieve fault history without physical access to the control cabinet. This capability is further extended by edge gateway devices — such as a Moxa UC-8100 or Advantech WISE-5000 series — that bridge the OT network to cloud-based IIoT platforms for predictive maintenance analytics and energy consumption monitoring.

Many industrial sites still operate with fragmented automation architectures — legacy servo drives running proprietary serial protocols, motion controllers isolated from SCADA systems, and no unified data path from the servo axis to the enterprise MES layer. The AKD-P00606-NBEC-0051 directly addresses these integration challenges through its native EtherCAT interface and CiA 402 motion profile compliance.

Protocol fragmentation is eliminated by standardizing all servo communication on EtherCAT, which is natively supported by leading PLC platforms including Beckhoff TwinCAT, Omron Sysmac, and Yaskawa MP3000 series motion controllers. Sites previously running SERCOS III or CANopen servo networks can migrate to EtherCAT using the AKD-P NBEC option card without replacing the mechanical drive train or motor wiring, significantly reducing retrofit costs.

Data island problems — where servo fault data, cycle counts, and energy consumption metrics are trapped inside the drive with no upstream visibility — are resolved through the EtherCAT process data object (PDO) mapping, which continuously streams drive status, actual position, following error, and DC bus voltage to the PLC in every network cycle. This data is then available to SCADA historians and MES systems for OEE calculation, predictive maintenance scheduling, and production reporting.

Remote monitoring gaps are closed by combining the AKD-P00606-NBEC-0051's network transparency with plant-level VPN infrastructure or cellular edge gateways, enabling remote engineers to access live drive data, adjust motion parameters, and acknowledge faults from any location — reducing mean time to repair (MTTR) and eliminating costly on-site service calls for routine diagnostics.

Q1: What is the minimum EtherCAT cycle time supported by the AKD-P00606-NBEC-0051?The AKD-P00606-NBEC-0051 with NBEC option card supports EtherCAT cycle times as low as 62.5 µs, enabling high-speed synchronized motion control across multi-axis systems with minimal communication latency.

Q2: Is the AKD-P00606-NBEC-0051 compatible with Beckhoff TwinCAT and Siemens TIA Portal EtherCAT masters?Yes. The drive is fully compatible with Beckhoff TwinCAT 2/3 EtherCAT masters and can also be integrated with Siemens TIA Portal environments using third-party EtherCAT master modules. ESI (EtherCAT Slave Information) files are available from Kollmorgen for seamless PLC configuration.

Q3: Does the unit undergo pre-shipment testing, and what warranty is provided?Every AKD-P00606-NBEC-0051 unit shipped from NANKMOS undergoes functional pre-shipment verification to confirm communication, power stage, and feedback interface integrity. A 12-month warranty is included from the date of shipment, covering manufacturing defects and operational failures under normal use conditions.

Q4: Can this drive be expanded into a larger multi-axis EtherCAT network?Yes. The AKD-P series supports daisy-chain EtherCAT topology, allowing multiple drives to be connected in series on a single EtherCAT segment. The network can be scaled by adding additional AKD-P nodes — such as higher-current variants like the AKD-P01206-NBEC-0051 — without modifying the master controller configuration, provided the total network cycle budget is maintained.