Schneider Electric 3402230500 34003816XD-1DA 34003816XD-6DA

Product Details

3402230500 34003816XD-1DA 34003816XD-6DA 0006230138B3 Product Description

The Schneider Electric INMC-3402230500 is a high-performance industrial network interface module engineered for seamless data communication between Altivar variable speed drives and upper-level automation systems. Designed to bridge field-level devices with supervisory control platforms, this module enables real-time data exchange across Ethernet/IP and Modbus TCP networks — forming a critical node in the smart factory data chain. Whether integrating with a Siemens S7-series PLC, a Rockwell ControlLogix controller, or a Wonderware SCADA platform, the INMC-3402230500 delivers deterministic, low-latency communication that modern industrial environments demand.

In today's connected factory, data flows from sensors and actuators through field buses, into PLCs, across industrial Ethernet backbones, and up to MES and ERP systems. The INMC-3402230500 sits at the heart of this architecture — converting drive-level signals into structured network packets that SCADA systems, HMI panels, and edge gateways can consume directly. This eliminates data silos, reduces manual intervention, and enables the kind of real-time visibility that drives operational efficiency.

The INMC-3402230500 is purpose-built for multi-layer industrial network architectures. At the field level, Altivar ATV61 and ATV71 variable frequency drives — controlling conveyor motors, pump systems, and compressor units — generate continuous operational data: speed references, torque feedback, fault codes, and energy consumption metrics. The INMC-3402230500 captures this drive-level data and transmits it over Modbus TCP or Ethernet/IP to the control layer.

At the control layer, a Schneider Electric Modicon M340 or M580 PLC receives structured data packets from the INMC-3402230500, enabling closed-loop control decisions without polling delays. Simultaneously, a Schneider Electric Magelis HMI panel or a Vijeo Designer-based operator interface reads real-time drive status — displaying speed, current draw, and alarm states — giving floor operators immediate situational awareness.

Moving up the network stack, the INMC-3402230500's Ethernet/IP compatibility allows direct integration with Rockwell Automation ControlLogix or CompactLogix PLCs via standard CIP messaging. This cross-brand interoperability is essential in brownfield installations where mixed-vendor environments are the norm. An Allen-Bradley PanelView HMI can display Altivar drive parameters sourced through the INMC-3402230500 without any custom protocol translation layer.

For SCADA integration, the module connects seamlessly to Wonderware InTouch, Ignition by Inductive Automation, or Schneider Electric EcoStruxure Operator Terminal Expert platforms via Modbus TCP. The SCADA system polls the INMC-3402230500 at configurable intervals, logging drive performance data into historian databases for trend analysis, OEE calculation, and predictive maintenance workflows. Alarm events — motor overloads, communication faults, thermal warnings — are transmitted in real time, triggering automated notifications to maintenance teams.

At the edge, an industrial IoT gateway such as a Moxa MGate or Advantech ADAM edge controller can aggregate data from multiple INMC-3402230500 modules across a production line, forwarding consolidated datasets to cloud analytics platforms or on-premise MES systems. This edge aggregation reduces network overhead while maintaining sub-second data latency for critical control loops. Paired with a Schneider Electric ConneXium industrial Ethernet switch, the INMC-3402230500 operates reliably in ring or star topologies, supporting redundant network paths for high-availability applications.

Power for the communication module is typically sourced from a 24 VDC industrial power supply — such as a Schneider Electric Phaseo ABL series unit — ensuring stable, noise-filtered voltage that protects the module's communication circuitry in electrically noisy factory environments. The complete data chain — from Altivar drive through INMC-3402230500, across the Ethernet backbone, into the PLC, up to SCADA, and out to the edge — forms a fully transparent, auditable data pipeline that is the foundation of Industry 4.0 connectivity.

Protocol Fragmentation: Many industrial sites run legacy Modbus RTU devices alongside modern Ethernet/IP controllers. The INMC-3402230500 resolves this by providing native Modbus TCP support, allowing older Altivar drive configurations to participate in modern Ethernet-based control architectures without hardware replacement. This eliminates the need for standalone protocol converters and reduces wiring complexity.

Data Silos and Production Transparency: Without a network interface module, Altivar drive data remains locked at the device level — invisible to SCADA operators and production managers. The INMC-3402230500 breaks down these silos by making drive parameters — energy consumption, run hours, fault history, speed setpoints — available across the entire automation network. Production managers gain real-time dashboards; maintenance engineers gain fault traceability; energy managers gain consumption analytics.

Remote Monitoring and Diagnostics: In distributed manufacturing sites, physically accessing each drive for diagnostics is time-consuming and costly. The INMC-3402230500 enables remote parameter reading and fault diagnosis via SCADA or HMI, allowing engineers to identify and respond to drive issues from a central control room or even remotely via VPN-connected systems. Mean time to repair (MTTR) is significantly reduced.

Alarm Tracking and Response: Unacknowledged alarms are a leading cause of unplanned downtime. By routing Altivar drive alarms through the INMC-3402230500 into the SCADA alarm management system, every fault event is timestamped, logged, and escalated according to configured priority rules. This creates a complete alarm audit trail that supports root cause analysis and regulatory compliance.

System Scalability: As production lines expand, adding new Altivar drives to an existing network is straightforward with the INMC-3402230500. Each new module auto-discovers on the Ethernet/IP network, and SCADA tag databases can be updated with minimal engineering effort. This plug-and-expand architecture supports phased factory upgrades without network redesign.

Q1: What communication protocols does the INMC-3402230500 support, and is it compatible with third-party PLCs? The INMC-3402230500 supports Ethernet/IP and Modbus TCP — two of the most widely deployed industrial Ethernet protocols. It is compatible with Schneider Electric Modicon PLCs natively and interoperates with Rockwell Automation ControlLogix, Siemens S7, and other CIP or Modbus TCP-capable controllers. Cross-brand compatibility makes it suitable for both greenfield and brownfield automation projects.

Q2: What is the communication latency, and is it suitable for real-time control applications? The INMC-3402230500 is designed for deterministic, low-latency data exchange over standard industrial Ethernet infrastructure. Cyclic data update rates are configurable to match the scan cycle of the connected PLC, typically achieving sub-10ms response times in well-designed network topologies. For time-critical control loops, it is recommended to segment the drive network from general IT traffic using a managed industrial Ethernet switch with QoS prioritization.

Q3: Does the INMC-3402230500 support remote diagnostics, and can it be monitored via SCADA without on-site access? Yes. The module exposes drive diagnostic registers — including fault codes, thermal status, current draw, and communication health — as standard Modbus TCP or Ethernet/IP data objects. Any SCADA platform with Modbus TCP or EtherNet/IP driver support (Wonderware, Ignition, EcoStruxure, iFIX) can poll these registers remotely. Combined with a VPN-secured network, full remote diagnostics are achievable without physical site access.

Q4: What warranty and pre-shipment testing does the INMC-3402230500 include? Every INMC-3402230500 unit supplied by NANKMOS carries a 12-Month Warranty covering manufacturing defects and functional failures under normal operating conditions. Prior to dispatch, each unit undergoes a full functional test — verifying communication link establishment, protocol handshake, and data register integrity. In-stock units are available for immediate shipment with global logistics support. For volume orders or urgent requirements, contact our team directly.